Quote:
Originally Posted by Sandy G
What's the point when they're nothing but big, ugly grey plastic boxes ?
|
You have a point, Sandy, and I agree with you. These days it wouldn't make much sense to put model names on TV's in black plastic cubes, even sets with RCA or Zenith stamped on the cabinets--the reason being that there is no more RCA, Zenith, Magnavox . . . as we knew these brands back in the day. Every one of these once-proud TV manufacturers has left the US for the Pacific Rim, now making sets that often don't last longer than the warranty period...unless you are lucky and happen to get a set that lasts years, as my RCA CTC185 set has (after the tuner grounds were resoldered). The brands are simply marketing symbols nowadays; televisions with "RCA" in block letters just below the CRT (the company's logo since 1968) are made by TCE (Thomson Consumer Electronics), sets with "Magnavox" or "Philips-Magnavox" are now manufactured by North American Philips (NAP), at least they used to be . . .
And so it goes. However, I did not even stop to think that other television manufacturers were giving their sets model names well into the '80s. RCA's "Dimensia" line, Sony's "XBR" premium series of flat-panel HD televisions, etc. were these companies' attempts at doing the same thing Zenith and RCA had done for decades with model names for their TVs, but again, they are simply marketing symbols in the 21st century. Even RCA's "XL-100" feature name, which was coined in the early 1970s when that series of TVs was introduced, meant "eXtendedLife 100(percent solid state)" and actually meant something when the line was new (all-solid-state TV's were still in their infancy then), means nothing anymore today. My RCA CTC185 19" table set has "XL-100 Commercial
SKIP" in white letters at the upper left-hand corner of the CRT mask, but I'm convinced that the label is just a carryover from the last days of the original XL-100 series since RCA does not use it on its new FP sets; probably stopped putting it on their CRT sets as well a few months before the end of the analog CRT era and about a year (more or less) before the DTV transition.
In any event, XL-100 is no longer used on Thomson-built RCA FP televisions; it is probably just as well, as the name has outlived its usefulness--after all, all televisions made today by every manufacturer are 100 percent solid state, so RCA (Thomson) sets are by no means unique today--and haven't been for years.
RCA could not have used this name, however, on some of its so-called "all-solid-state" sets of 1968-'69, as many of these sets still used a tube as the high voltage rectifier. That it is a one- or two-volt tube is beside the point. The point is that it is a vacuum tube, and any TV using such a tube in this position (even if the rest of the set is all-transistor) is definitely not all-solid-state. In fact, technically speaking,
no pre-flat-panel solid-state TV is "all" (as in 100-percent) solid-state, due to the CRT. The term would make sense, however, when describing flat-panel televisions as these
are completely solid-state, even down to the display, which these days uses (in RCA/Thomson sets anyway) energy-saving LEDs. I don't know if Panasonic uses these in its premium "Viera" line of flat panels, but it is a logical step beyond plasma and LCD displays, and would put Panasonic in direct (and, I believe, very fierce) competition with RCA/TTE as these are, to the best of my knowledge at this time, the only two well-built and reliable brands of flat-panels available today.