|
while fussing endlessly with the convergencem, I decided that something must be wrong. I makes almost no difference when plugged and unplugged (dynamic convergence).
So I decided to check the diode pack, hmm a long crack runs the length of it.
Tested 2 of the diodes, so far both are open. Squeezing the pack makes for momentary resistance readings. I checked the voltages on the conv board before pulling it, no DC reading where there should have been but AC reading instead (which is why I suspected the diode pack).
Anyhoo I have some 1n4005 diodes that I will use (the orig are 1n536).
I hope this does the trick...
|