Thread: Zenith console
View Single Post
  #8  
Old 05-23-2010, 08:46 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Quote:
Originally Posted by DaveWM View Post
Thats good to know (that you have 3 sets with orig caps).

One thing I know it needs is a good tuner cleaning. I may get around to doing that. The UHF is jammed up jelly tight
Is this a set with the concentric tuning knob? If so, that inner wheel for the UHF swells around the shaft over time and seizes it. You will have to take it apart and carefully hone the hole with a drill bit slightly larger than the hole, or use emery cloth/light sandpaper in a non extreme case. Any forcing of it will strip the gears (if used un-repaired). Apply a light coating of silicone grease to the shaft when reassembling.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26

Last edited by zenithfan1; 06-01-2010 at 10:35 PM. Reason: clarify somthin'
Reply With Quote