Quote:
Originally Posted by Eric H
I seem to recall someone tried soaking one in a wading pool full of plain water once with good results, took several days but no danger of implosion.
It may not work with some types of adhesive.
|
That makes a lot of sense since PVA was used.
Quote:
Originally Posted by wa2ise
You may want to use a full face shield, the sort welders use. Flying glass could get past the glasses. Besides, flying glass on bare face skin won't be a picnic even if it stayed out of the eyes.
|
I second that. Where I work, full face shields over safety glasses are required when grinding. Flying glass would be worse. I'd worry about the neck area too.