Quote:
Originally Posted by radiotvnut
I replaced the damper and it now has HV, color, and full sweep. The convergence is, of course, about as far off as you'd expect since the convergence board and yoke are messed up. Also, while it was playing, I heard an arc and saw a split second collapse of vertical sweep. And, the vertical hold has to be all the way to one end in order to lock the picture. The first order of business will be to repair the convergence components.
|
The vertical sweep problem may be part of why your convergence is out of whack. If the vertical hold must be set at one end of its rotation to synchronize the picture, the sync may be (probably is) very unstable. Sync problems, vertical or horizontal (particularly the latter) in color TV can cause serious convergence problems as well (one is tied in with the other). Fix the vertical sync, check the horizontal to be sure it's peachy (my term for okay), and I'll bet your set will converge just fine. Of course, if the convergence board and/or convergence yoke are out of order (as yours seem to be) for any reason, the convergence will go haywire at the drop of a hat. I'd fix that as soon as you get the vertical sync to the point where the picture holds solidly with the control at midrange; until you do the latter, you may have the dickens of a time getting the convergence right.
Good luck. You seem to be on the right track to getting this TV working again as it once did. A little more work with the sync and the convergence and you will have a television set you can be proud of; these older color sets can and do make excellent pictures when they are working as they should. You are saving another great old TV from certain death in a landfill as well.