Quote:
Originally Posted by PredictaNoob
I'm not sure I understand you. I see C3 as a ceramic cap up on the video IF board. The only cap I see near the P.T. is C41, a .047 line bypass?
|
I am looking at the SAMs, C3 section A is one of the electros that bypasses the cathode of the 6DR7. The sams and the notes printed on the PC board do not match up. See if you can find a wire from the thin can (low volt 100mfd) going to the pin 9 of the 6DR7 (or to the pot that connects to that pin).