Thread: CBS radio
View Single Post
  #8  
Old 03-23-2010, 09:28 PM
Robert Grant's Avatar
Robert Grant Robert Grant is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Monroe County, MI
Posts: 518
I don't know if I would like using a stack of A23's for the "A" supply, an A23 is basically a pack of button cells, and life can be severely limited. I used to use four A23s in my Motorola Pixie, and the life was really short (incredibly the 415 "B" battery for the Pixie is still in production!). If it can fit, stacking 9V "transistor" batteries (today, usually used only in smoke detectors) is better.

If the dual "A" batteries are both the old "G size" batteries, and the radio has parallel filament supply, I would strongly urge you to try only one alkaline D battery for the "A" supply.

I have one (an seen other) radios that used two "Size G" for the "A" supply, in an effort to reduce how often one needs to replace the "A" batteries.
This was never good engineering practice. Once one battery got to be weaker with the other, current would start flowing from the stronger battery, backwards through the weaker one. Eventually, one or both batteries burst, leaking acid all over the radio's innards. I have seen portables ruined by this. (BTW, you can make a "Size G" battery by placing a "Size D" at one end of a toilet paper tube, + tip protruding, and placing balls of crumpled foil into the tube under the - end).

I find that battery portables often have good reception because they are not connected to the power grid (and all of the interference from modern gadgets plugged into it) and can be used outdoors for even less interference. I regularly listen to WSM (about 350 miles away) and CFZM (about 250) on my tube portables.

You may be able to find out what kind of capacitors to replace the wax paper caps with by reading the figures often printed in plain numbers on the wax paper caps themselves. Good luck.

Last edited by Robert Grant; 03-23-2010 at 09:59 PM.
Reply With Quote