View Single Post
  #33  
Old 03-21-2010, 07:56 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by radiotvnut View Post
Speaking of discharging HV, you'd cringe if you saw what a friend of mine used to do regarding capacitors. Heck, I cringed!

If he suspected a bad cap, lets say in the power supply or vertical circuit, he'd flip over the chassis, power up the set, grab some odd value cap and attach some test leads to it, and start jumping caps while the set was on. Usually, a loud SNAP and some heavy sparks would take place when he'd junp the test cap across the one in circuit.
My dad did this for years - he had an 80uF 450V cap wrapped in electrical tape and with leads terminated in an alligator clip and a red test prod. He'd use it to jump can caps with, and when he found the offending cap, he'd either replace the can or isolate the bad section and replace it with a single cap. Works great on older tube sets - great for finding open input filters.

Me, I was raised on solid state sets, and the ESR meter proved itself with me. Quicker - and the set was unplugged!

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote