Thread: Sony KV-27EXR25
View Single Post
  #5  
Old 03-21-2010, 03:03 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I've had several brands of '90's and early 2000's era TV's with no way to access the menu from the set. And, many of these sets would not function correctly with a universal remote. About 10 years ago, I came into possession of a couple of nice Hitachi 20" sets from the early '90's. There was no menu botton on the set and a remote was required to program the channels. It wouldn't have been a big deal had they already been programmed to the local cable channels; but, they were set to the 3 local OTA stations. I tried every kind of universal remote that I could find with no luck. And, an original Hitachi remote cost an arm and a leg. I ended up selling the TV's for cheap just to get them out of here.

So, why did they not put a menu button on the set? They want you to have to buy an expensive remote from them when you lose or break the original one. The American branded sets like RCA, GE, Zenith, Magnavox, Sylvania (NAP era, not Funai), and Philco all seemed to have menu buttons. The ones without menu buttons were often made by Sony, Sharp, Hitachi, Emerson, Orion, Funai, Daewoo, etc. In fact, we have a coupld of mid '90's 13" Sharps with no menu button. Fortunately, a "one for all" remote w/ menu button will program these sets.

A few years ago, I obtained two 36" Magnavox commercial sets with no menu and no remote would bring up the menu. I did some research and discovered that the only remotes that would bring up the menu were special remotes that were available only to commercial interest. Someone I knew worked for Motel 6, who had one of these remotes. I arranged to take each set to the motel and let them program it for cable as they would not let me borrow the remote. So, I know first hand that not having a menu button on the set can be a PITA.
Reply With Quote
Audiokarma