View Single Post
  #75  
Old 03-19-2010, 03:00 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
ok back to this one.

Pulled the chassis, while I had it out I decided to clean the tuner, I noticed the gear the turns the little tuning slugs was stripped. I had a junked tuner so I was able to replace that gear. Cleaned the turret buttons with an eraser and them lubed them back up with some tuner cleaner/lube.

I am going to replace some more caps on the deflection board and on the damper tube. I scoped the grid of the vert osc last night and it def has a lot of Horz noise getting in there (when compared to the other set with the same chassis). Not sure exactly how its getting in, lead dress looks good. I am hoping by replacing the remaining caps I will just get lucky. Its just too darn hard pulling this chassis and PCB work is easy so I figured might as well. there are not a lot of cap anyway. I dont like the way the vert hold pot ground is shared with the horz hold pot but it works on the other set...

Anyway will get back on it tonight.
Reply With Quote
Audiokarma