View Single Post
  #18  
Old 03-10-2005, 07:24 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
Quote:
Originally Posted by old_tv_nut
At Motorola, one of the things we did was competitive design analysis, (would be called "benchmarking" today). The GE sets were the most cost-reduced of any. Where other manufacturers had at most a 3-step design process (research, advanced development, and chassis design), GE followed the first 3 steps with a formal cost-reduction step before production. Resulted in such things as three potentiometers on one substrate for the set-back secondary controls. (The controls' carbon tracks were all three on one phenolic substrate, and there was no metal enclosure.)
I have seen this problem with GE adjustment pots...just replaced them with regular pots installed on a bracket. The GE performance seems quite good to me when the sets are working, but is seems like there is a bigger tendency for intermittent problems due to the cheaper components....also GE circuit boards can be tough to work with as they tend to crumble.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote