|
Went and got some deoxit contact cleaner and sprayed the pots with it. Removed some of the modules, the luma and chroma ones, resoldered the contacts and re seated them. I actually like this design. You don't need tools to get the modules out, and if one went bad I could just pop it out and replace whatever went bad on it. The only complaint is they they don't seem to be keyed so you got to be careful about putting them back in right. Well, some have empty holes where contacts would be on perhaps another model so that's kind of a key.
Gonna let it sit for a bit then power it up and try touching up the convergence...
EDIT: Got the convergence... better. Not perfect though I doubt I'll see perfect convergence.
Very impressed with this set. Good picture, and it was made to be worked on! It even has its own plastic diddle stick which doubles as the focus control! Um, I have to set the focus control all the way to get perfect focus. Don't know if this is supposed to be like that or if some component is just at the edge of tolerance.
Either the deoxit or resoldering those module contacts fixed the picture interference when tapping the set. A couple issues remain:
Pressing the chroma control button next to the power button (auto color?) makes the image go almost insanely bright.
The TV overscans about maybe 1 inch on all sides. Pretty sure this is normal. I did notice a "size" control on one of the module boards. I may give that a tweak.
Last edited by MRX37; 03-13-2010 at 03:50 PM.
|