View Single Post
  #12  
Old 03-12-2010, 10:44 PM
de.facto7's Avatar
de.facto7 de.facto7 is offline
AK Subscriber
 
Join Date: Feb 2010
Location: utah
Posts: 112
Well... I think I figured it out, although I don't really know exactly why what I did worked.

It seems to have been an antenna issue. I added a wire between the antenna terminal on the inside to the center pin on the bus that controls where the antenna is connected. That center pin is the braided wire that leads to the tuning cap on top on the side that is NOT connected to the 6A8 tube. All the unevenness between the ends on the bands and the volume issue as well as the gravelly sound are no more. I have too many channels now. They are everywhere. On the SW side, everything is clearer but if I add a ground from the chassis to the radiator in our house, I can hear Voice of China if there is such a thing... It's amazing! I have to remove the ground though if I use the AM band or I loose my lower half of the radio channels.

Now, just because it works, doesn't mean it right. If this is a bad idea, please let me know. I'm just futzing around. It would be nice to know what I did here. It's not a wire that existed before.

Thanks everyone.
Reply With Quote