Quote:
Originally Posted by jr_tech
So does the Mitsubishi refresh at 240Hz, or is that not a necessary part of being "3D ready" ? I assume that the system uses active LC shutter glasses... does the TV display provide the sync info?
Years ago, I saw a demo of a similar system that used a JVC CED player. At that time the Shutter glasses were not wireless, and IIRC were plugged into the disk player. Jaws 3D looked pretty scary but some flicker could be observed, at the low alternating 30 Hz rate.
Robert_Grant... Very cool about the stereo photography !  When I was a kid, my parents had a Viewmaster camera, which worked pretty good, but the image size in the film was only about 1/4 frame size, so the resolution was somewhat limited.
jr
|
Grrr, grumble grumble...

The answer to the first part is no. It refreshes at 120HZ max. To the second part it's yes, no, maybe.
The set has an emitter jack that is used to sync the glasses via a direct cable or IR. The Mitsubishi was designed before there was a 3D standard for packaged media like Bluray and DVD. They also warn that it may not be compatible with future 3D standards.
The model I have requires 1080p 60HZ and that the device support checker board format for video and images. I suspect that means there will be zero chance that it will work with the new Bluray 3D players. I hope it works with Directv. It's a software update for the receiver so maybe they'll try to make it work with all existing sets. Albeit, some flicker.
John