View Single Post
  #30  
Old 03-06-2010, 08:24 PM
holmesuser01's Avatar
holmesuser01 holmesuser01 is offline
VideoKarma Member
 
Join Date: Jul 2005
Location: Asheville NC
Posts: 1,731
A flashlight on the magic eye made no difference.

I checked the HV... right at 14K.

Applied 7 volts to the kine filament thru my tester. Slowly, the meter needle moved up toward good. Finally, it was at 80% and holding. I left it alone for a time while I worked on the tuner. Got the tuner cleaned up and now the fine tune is working. This took about an hour.

Turned my attention back to the kine, and noticed that the meter was now indicating BAD. The filament is intermittent. I can see it flickering on and off. It couldn't handle the 7 volt supply. The set will have to wait for awhile since I need a kine. In the meantime, I will get the stereo half of it running nicely. I hope I can either find a kine for it, or can get the one I have rebuilt.

Until then....
Reply With Quote
Audiokarma