View Single Post
  #4  
Old 02-22-2010, 05:07 PM
colorfixer's Avatar
colorfixer colorfixer is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 349
The magnets were definately added after the fact. Sony wouldn't use scotch tape, clear silicone or hot glue.

The original clear plastic strips with the magnets on the bottom were stuck to the inside of the case by the fool who attempted to swap the tube. Were it not for the fact that the tube is new, I'd probably have saved a whole bunch of time performing the lineup but once I figured it out its relatively simple.

On a whim, I pulled the tube, degaussed the hell out of it, then gave the metal funnel the once over in an attempt to appease the gods.


I'm leaning toward the degauss coil. I've unplugged it and letting the thing cool down before I claim victory. I recapped the deflection board since I had everything apart, and wasn't disappointed to find quite a few bad caps, even for a very clean interior.

Once setup, the thing makes a really cool pix on the super fine pitch 330YB22.
The tube has a label marked "EBU". Does this indicate the phosphor type?
Reply With Quote