View Single Post
  #111  
Old 02-05-2010, 12:16 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
pulled the chassis, wow that was easy, checked two of the cans, both 100-150uf at 200-250v. Both of them checked fine for value and leakage so I will leave them be. I will pull the 1000-1500 50v can and restuff it. I know one section for sure is bad (that is the one that was causing the hum bars).

There is what looks like a motor start can cap (oval shape with odd connectors). Not sure what it is.

I was toying with the idea of removing and re heat sinking the HOT, what do you guys think?

Lastly I did some work on that deflection board mount rail. It uses pins that insert thru a plastic rail. The CRT board pins were loose, the rail had broken. Its ok as long as you dont pull the board for service but I did not like that idea and since I had the chassis out it seemed like a good idea to deal with it.

I was able to bone saw out some "doner" plastic mounts, I just cut them flush up on the rail 3 in a row. I then cut out and cleand up the rail where the busted mounts were. Next I made up a small wood support that lock in the doner plastic to the existing rails, providing both alignment and glue surface. I seems to be solid now, I am letting the glue set up over night. I will try removing the board to see how well it all works tomorrow (assuming I did not manage to glue the board in place).


I am still leaning toward building a custom box for the tv, I just can stand the plastic faux wood inserts on the speaker. Fake wood, well that pretty much sizes up the whole of the 70's...

I will say one thing even though the cabinet bites, I cant say anything bad about this chassis (well other than the plastic rails failing).

Oh and I watched it some more, seems the purity is getting better, my guess is the auto degausser must be improving it.
Reply With Quote