View Single Post
  #83  
Old 02-01-2010, 07:23 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by DaveWM View Post

Oh and the IF board did not have ANY chassis screws so I stole one from another board and used a single screw to ground that board. Dont know if that had anything to do with the pic improvement.
Years back I was fixing up an Akai receiver, and found that missing/loose board mounting screws allowed microprocessor crud into the audio. Was a low level high frequency buzz. I ended up using screws with split ring washer/spring things to apply pressure on the board ground trace-chassis connection, even if the screw is slightly loose. Seems to work well years later.

If the extra filter cap cleaned up the hum, and it wasn't the chassis screw, I'd replace the original cap that is supposed to do that filtering. Before it shorts out.
__________________
Reply With Quote