|
Really starting to hate this thing
I spent a couple hours checking voltages on the pins of the transistors and the IC's got a couple odd readings (should be 18v is 1.5v) not that that helps any, I mean ok I have odd voltages, now what. the one voltage is on a pin of an ic that I have no way of knowing what to do next. I guess if I had a replacement IC I would pop it in, but alas not like tubes or transistors.
I did check the resistance checks they were ok. argh, how do you guys deal with this stuff.
My last resort will be to check/replace everyone of the little electro caps on the chroma board, but again who knows could be the dumb IC.
|