View Single Post
  #8  
Old 01-12-2010, 07:01 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Doug,

I did some digging - it seems I have a mint-in-box speed aligner and BE156 bias supply - it was in some goodies given to me over the holidays by a retired TV repairman, a friend of my Dad's. I called him - he said there's a reason it's near mint. He rarely used it! He still has his little scope - it's a toy for his grand-nephew. The styrofoam box inserts are still virgin-new on mine, but my box has aged more than the one on eBay. The serial number label on the box is filled in with a pencil!

FYI - the Speed Aligner came with a workshop manual that's not pictured in the eBay listing. It has a green cover and walks the tech through an alignment of an Admiral K-10 Solid State chassis. If you need this, lemme know, and I'll gladly loan it so you can make a copy.

Interestingly, the PF Reporter article and the workshop manual mirror each other, talking about how to sell alignments to make the speed aligner pay for itself. They claim up to $10,400 annually in selling alignments.

I'm gonna play with mine this weekend - see how the frequency stability of the markers compares.

Ditto on what CTC17 has to say - silver migration in older crystals is a very real problem - the silver migrates onto the crystal, changing it's mass and lowering (typically) the frequency. Saw lots of affected crystals in the COMM/NAV/IFF shop I worked in while in the Navy.

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote