Quote:
Originally Posted by andy
<snip>
I don't like the coupon boxes because they're too limited. My RCA won't even let you manually add channels that weren't found by the auto scan. Come to think of it, you can't even manually tune to a channel not found by the auto scan. That makes any kind of DXing impossible.
|
Definitely something to watch out for when buying a converter box or TV set!
Not all of the "coupon" boxes were as limiting as the RCA, however.
The Zenith/Insignia boxes have a "Manual Tuning" mode with up ch/down ch actual channel tuning and a signal meter that is
excellent for DXing. They also allow the direct numerical entry of an actual RF channel (provided the channel you enter is not already in memory as a virtual channel).
The Philco TB100HH9, the Digital Stream DTX9950 and the AccessHD DTA1030D (and, no doubt, many other badge-engineered clones of these) also allow the direct numerical entry of an actual RF channel (provided the channel you enter is not already in memory as a virtual channel).
Sometimes, actual channel entry function is in a CECB, but you need to look for it to find it. The Sansonic FT-300A is a case in point. It does not allow the direct entry of an actual channel. However, it does have manual up ch/down ch tuning of actual channels similar to the Zenith. Strangely, it is called "ANT LEVEL", not "manual tuning".
The Zinwell ZTA-970 has a "Manual Scan" function similar to the Sansonic, only with an annoying "twist". Using the manual scan on the Zinwell, only the signal strength and signal quality meters are displayed, no audio nor video. If you want to see a station that you have manually tuned, you need to punch "Search", and, if there is a usable signal, the box will go to that station, adding it into memory by virtual channel, and ending the manual scan function. If there is no viable signal after about 3 seconds, the scan function is abandoned, and the box goes to whatever channel you were last watching. I got used to this, but the system still forbids leaving the box on an unused actual channel whilst one waits for a DX signal to come in. One way around this is to save as many stations as possible, and remember which virtual channels correspond to the actual channels on which one wishes to DX (e.g., before transition, I kept 3-1, WKYC, actual RF channel 2 [then - it is now 17] in my memory, and tuned my Zinwell box to virtual channel 3 if a skip signal was trying to come in on actual channel 2).