View Single Post
  #11  
Old 01-01-2010, 10:26 PM
Sam Cogley's Avatar
Sam Cogley Sam Cogley is offline
The Devil Inside
 
Join Date: Dec 2008
Location: SW Missouri
Posts: 299
Quote:
Originally Posted by Reece View Post
The darker edges around the front panel can be produced using a spray toner, which is a colored lacquer. After you fill and seal the front panel and get one coat of finish on it, you can spray the edges, then put the final clear coat or two over it all. Practice on scrap to get the toned effect you want. Spray cans of lacquer toner are available from a number of suppliers, RadioDaze being one of them. You might find it locally if you've got a store that caters to woodworkers and refinishers.
Thanks for the suggestion. Grizzly Tools is just down the road from me, they should have something around.

Current plan is to make all new front and rear plates, trying to fill all of those holes would be a pointless exercise as I'd never get anything to match the veneer.

I haven't taken a picture, but it looks much better with knobs in place, even in it's battered and dirty state.
__________________
Growing up leads to growing old and then to dying,
And dying to me dont sound like all that much fun...
-John Mellencamp
Reply With Quote