View Single Post
  #7  
Old 12-25-2009, 02:44 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
C2510 (47uf/50v) had indeed been replaced (sloppy, left the leads full length, looked like they had folded over, I had hoped that was it, cut the leads, prob still there). The pcb trace had lifted, I jumped it with a small piece of wire.

I tested the cap, the replacement was good, but I wonder if when it was possilibly shorted if that took something out. There is a big bridge rec, I get 158vdc on it.

when starting up, the green light comes on, and I hear the HV start up (HV crackle0 thats when the green led goes out, then starts the blink sequence.

model # 32PT9100D/37
Reply With Quote