View Single Post
  #3  
Old 12-08-2009, 07:08 PM
YamahaFreak's Avatar
YamahaFreak YamahaFreak is offline
<-- CSXT 6038, EMD GP40-2
 
Join Date: Dec 2005
Location: TOO sunny Florida, USA
Posts: 580
Post Update

I removed the board today and sprayed the entire thing down with the 'mist' setting on my garden hose. I covered the openings on the flyback and HV distributor so as not to let moisture in. Then I used a combination of a hair dryer and leaf blower to dry the board thoroughly(hair dryer wasn't moving enough air!). Thank God they numbered all of those zillions of wires connecting to the board, by the way.

So it's all back together. Now I try it again. When I hit the power button for the first time, the flyback (I think) makes a buzzing like a bug stuck in a zapper, so I unplug the set. I also notice a good amount of smoke coming from behind a side panel that I can't tell what's on the other side of. I remove said panel and thankfully can't find anything charred or smelly. So I try it again. (bad idea?) This time I hear a low-pitched whine for about a second, then the flyback tries to start up but cuts off within a quarter second. No smoke at all this time. I try this several more times always with the same result. My guess is that there is some moisture inside the flyback that is causing a short, which in turn is causing the power supply to shut itself off to prevent damage. Do you think that if I give it some time, the moisture in the flyback will evaporate and I might get better results?
__________________
Sony Trinitron Fan
Reply With Quote