View Single Post
  #30  
Old 11-30-2009, 07:39 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
looking better all the time, replaced the horz afc diodes, had to re adjust the horz osc coil, checked the HOT cathode current right on the money (124 ma). I will be adding a cathode fuse later and maybe a B+ fuse as well. pic has a bit of a lnterlace problem, but seems to be settling down. You can work it out pretty well with very careful adj of the vert hold but it is just a little to critical. It seems to be getting better as the tv is used. I dont know what circuit in the set conrols vertical interlace sync phase inverter perhaps?

I will check that tube its a 6gh8 by subing with a working one. other tubes include the sync sep /video output tube a 6eb8.

and of course I can check the various resistor in and around those same tubes.

If someone can explain how the interlace is controled pls jump in.
Reply With Quote
Audiokarma