View Single Post
  #26  
Old 11-29-2009, 07:32 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
dug out a couple strong IF tubes getting a pretty decent pic now, still want to replace those horz AFC diodes (even though it seems locked in ok). The blanking is completely disconnected.

the horz osc seems odd, it was fine then I heard it slow down, lost HV and parts started getting hot. I quickly adj the horz pot and the HV popped back on. It has a new horz osc tube. Guess I need to check the voltage drop across the HOT cathode resistor and see where my current is.


Its like I cant adjust the fine tuneing enough to get a real clean pic. I don't know if that is the lack of blanking or not. Will only be able to tell when I replace that vert out tranny.
Reply With Quote