View Single Post
  #29  
Old 11-14-2009, 01:54 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
The most probable resistors to go bad in the audio section are R118 a 470ohm 1 watt resistor and R115 a 270 ohm 1 watt resistor. R118 is operated at about 0.8 watts, very close to its rating and lives a hard life.

I had a problem with heater to cathode leakage in my 6Y6 output stage. You have a 6V6, but it's very similar. The leakage did cause some audio fade and crackling. Unfortunately most tube testers aren't sensitive enough to find small leaks that can cause a problem.

The heater is biased at -135 volts, about 15 volts below the nominal -120 volts the cathode operates at.

John
Reply With Quote