|
Very Nice!!!! Tnx for sharing your methods all of us can use a little inspiration to carry over hump of a seemingly hopeless project. About ten years ago I manage to get a basketcase National SW-3. Always wanted one cause I had heard that they excellent performers. The SW-3 is a three tube regenerative designed in the late '20s with plug in coils from 90kc to 30mc special bandspreadcoils for the ham bands. The first came out in 1931 the production run ran to about the end of WWII. Lots of different versions from ac with 2.5v and 6v tubes, dc 6v tubes, battery which used 2v dry cell or one that you could use 1.5 or 6v tubes. Anyway this one was missing lots of parts one was a thumbwheel knob for the rf gain. Hens teeth. I manged to get silicon mold material from work. Made a mold and molded the knob from bondo. Worked great! Have also used bondo for molding odd shaped power connector for some military gear I've picked up over the years.
Terry
|