View Single Post
  #26  
Old 10-30-2009, 05:52 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Quote:
Originally Posted by mbates14 View Post
if its intermittent, ill tell you what the problem is. soldering. period.... no matter what.

easiest way to resolder a flat-pack IC such as the micro, is take a thing of solder paste, the stuff you refrigerate, use a needle tip, put a tiny bead on all 4 sets of pins. then take a hot air rework station, about 25% air, 75% heat adjustment, and then take the smallest gun tip you have, like i do, and gradually blow toward and go down the set of pins. it will re-do solder on all pins, using a lighted magnafier, wick up any potential cross-over.

if you are going to repair any of these kinds of electronics, you must have a rework station, thats about the jest of it. and by looking at your high-res photo, i can see some cracking of the pins of the CPU because of the heat issue. plus its not a bad idea to reflow the DRAM IC.
I have a soldering iron. That's it.

Also, it was intermittent on *one* tv... out of maybe 20 that have failed so far.
Reply With Quote