.....electric baseboard heat. About 20 years ago I was working on someones' set, and I had just unscrewed the cable from the set and let it fall to the floor. It bumped the baseboard heater and POW

. It burned a small hole in the top of the heater. Of course, I was curious about this. Turns out the heater was wired incorrectly. The metal frame of the heater was connected to one phase, not to ground. The cable was grounded, so when the two touched, it connected 120V to ground. I'm sure glad it wasn't me that touched the heater! Before I continued working I shut off the breaker for the heaters and insisted (in writing on the TV repair invoice) the customer have it repaired ASAP