|
I just checked my sams 16-19.5 then 17kv so I guess they want it to be 17kv but anywhere from 16-19.5 is ok?.
I will check the cathode current on the HOT. I was planning on putting a fuse in line with that cathode (.2 amp fuse) as a precaution to a burned up flyback. That would do it right?
I figure I can also use the fuse holder as a easy way to check the cathode current (pull fuse, hook up mA meter).
I am going to play with it some more esp now that I have a handle on the vert control for the interlacing (per my other thread, I think this one could use some adj as well).
I will get a screen shot soon.
|