View Single Post
  #11  
Old 09-21-2009, 09:13 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Hey guys,
I've been poking around in thais chassis tonight with a meter and a sams and a cold one (pepsi).

Well im finding a load down of the 390v B+ supplying pin 10 of the 6JC5 vert output. There should be 322v there and at startup the voltage drop goes from 390 to 223v. Im finding this all over the 390v B+ for the sections requiring it. Actually at the source PS cap I get 400v and after a 22k 1/2w resistor (that is dark and overworking) it drops to 223v. So something is really loading down the 390v. I cannot seem to pinpoint but ill keep checking.

Oh yeah, about that 22k resistor. It measures 10k and I soldered in a new 22k in place. It's getting really hot.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote