View Single Post
  #3  
Old 09-20-2009, 10:15 AM
rollei35guy rollei35guy is offline
...
 
Join Date: May 2008
Posts: 86
Quote:
Originally Posted by jpdylon View Post
If you're lucky, its as simple as resoldering the 12v standby transformer. There could also be problems in the switching power supply or perhaps a bad HOT. However if you didn't see any smoke or hear any pop - it can't be all that bad.

They did have great pictures, and as long as the grayscale and tracking was still good before it failed - FIX IT!
Hey, thanks for the advice. There was no smoke or sparks or shooting flames. It just kind of died gradually so solder joints might be problem. I'll check out the supply.

I have not tried to troubleshoot it. Will be 'another' winter project.

I have and adapter that turns it into a CGA monitor too. Whoo-Hoo.
Reply With Quote