|
Zenith26,
did you replace the filter can cap on yours? That is the only e cap I did NOT replace (seems fine no hum or decoupling issues).
One odd thing I have noticed, the stereo light takes about 10 seconds to come on. I prob should have restuffed that can, but I just ran out off gas.
I did have the hissing issue, replaced two transistors on the driver board (the 1st two, did not do the last one in the series). Only one channel had the problem.
There is still a slight hiss (you can here it in the aux mode with no signal, starts at about 1/2 vol setting to become noticable) about the same on both channels.
I was thinking about replacing that driver board final transistor, but then thinking BP transistors may just be noisey in general.
I found some generic germainium transistors for .50 each at a local supplus store, checked them, got a bunch. I wonder if a 2n3906 silicon would work or would the bias be all wrong?
|