[freakaftr8]

Actually it started with a vertical linearity issue. As the set warned up the lineraty went nuts. I found a leaky 50v 100mfd cap. I replaced it with a new one backwards. I since straightned it out and this is the result. The cap did not blow up or anything but there is a what seems to be a 17 k high wattage green resistor about 2" long gets mighty hot right off the bat. I probed it with my VOM and when I touched one leg the raster came back. But that in turn took out a 470ohm resistor that goes off pin 11 of the HOT and the other side to an orange wire going up the the yoke. The other orange wire from the yoke goes to the 17k resistor. But I think I originally screwed something up by replacing that cap backwards. I'm thinking either I destroyed the yoke or the vert out transformer or maybe its simple.