I'm down to the sweep and HV sections and have a couple more questions for you guys.
The vertical sweep is missing two tubular ceramic capacitors. Here's what they look like from another set.
One of them had been replaced with a little disc cap and the other is missing entirely.
Working from the schematic, they don't appear to carry HV DC.
Is there anything special about those caps or can I use modern mica or disc ceramic replacements?
Finally, I need to rebuild the flyback.
Originally, it used a 1250pF mica cap like this photo from another set.
I dug up this more modern 1258pF mica cap. I'm not sure if that's close enough or the voltage rating is high enough.
Here's the schematic.
Interesting how the cage is now grounded whereas it's floating with a 470K to ground in the older TS-4 chassis.