|
Usually the doorknob cap goes leaky. I would power the set up without the cap in place. Just make sure the socket is far enough away to prevent arcing to the chassis. Also, check the high voltage rectifier tube. A shorted doorknob cap can kill this tube. I would change the wires but they usually will puncture and arc or burn if they are bad. The doorknob cap filters out the ripple from the high voltage rectifier. I have had slight problems with picyure tubes where the aquadag fell off and the capacitor ation of the tube was too low to hold a good charge but my Motorola TS-18 plays fine with no aquadag left at all.
|