Not to be glum, and I'm not trying to be an a$$, but you're not really posting a lot of info here. There are far more basic things you could be doing, such as testing the flyback for continuity, looking for bad caps in the HV cage and horiz oscillator circuit (both my current sets had that problem), open HV rectifier(s), bad wiring, and on and on. One thing you should do regardless of anything else, is replace all the HV wiring- that is, the wires on the HV rectifier filament, and the anode wire itself. The HV wires on my Philco were very bad, I wouldn't power it up without replacing them. 15,000 volts of leakage isn't good.