View Single Post
  #13  
Old 08-04-2009, 10:12 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by Geoff Bourquin View Post
...is something missing there? I don't see the vertical pin that grabs the tape on the far end of the arm in question. I wonder if it somehow was damaged or removed.

I agree with the advice from everyone else, but will add one thing. I have seen a few of those stuck so bad that I had to drip a drop of acetone on the pivot point ( maybe several drops several seconds apart to keep it wet as the acetone evaporates) to help soften the grease-turned-cement that Sony put there.
I hope the guide pin is hidden from our view under the pinch roller. I think it is. The arm has a bend in it where that hole is as I recall and extends behind the pinch roller.

I've used the hot tip of a soldering iron on the arm next to the arm pivot point until it starts to move on ones so stuck wouldn't move at all without possibly bending the guide pin (almost like glued with epoxy or super glue!) Takes about 10 seconds of heat and it starts moving. The heat dissipates fast into the aluminum and I have never damaged anything doing it that way.
Reply With Quote