View Single Post
  #4  
Old 07-30-2009, 12:27 PM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Is the RVS thread arm nice & free? I bet it's jammed all the way out, which causes the tape to have no tension (and to eat tapes if it decides to ooze back into position)... I don't have a picture, but it's an arm that has a gray pot metal hub, and a stainless pole, which swings underneath the front of the cassette for eject, then when loading, the arm pulls the tape out of the cassette first, to bring it in place for the pinch roller to come over. If it's jammed all the way out, it will be sitting to the right rear of the pinchroller and capstan with no tape around it while playing. That needs to be free as the breeze. If it's even slightly gooey in movement, you're in trouble. It takes a 4.5mm nut driver to take the arm ass'y off, and you clean the axle and inside the hub with a toothpick wet with WD-40. (naturally, get NO WD-40 anywhere whatsoever except for the hub and axle, and you can use a tiny dot of white grease when reinstalling the arm. That's the #1 problem I've seen on those, and it's a GREAT VCR!!!!!! Probably the best Sony VHS machine ever made for home use. Another tip: Remove and throw out the auto-cleaning arm & yellow foam pad. It's nothing but trouble.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote