|
If this is the type with a row of illuminated channel numbers you need to have a UHF channel indicator tab in the window if you want to tune UHF...if there is a VHF number in there it will only tune VHF. If there are individual knobs for each channel you tune the knobs to tune in each channel...if a UHF number is in the window it should tune all the way up to channel 83.
Have not seen a Zenith of this age with a different type of channel selector except the motorized knob type tuner which I don't think this has.
If it does have a totally electronic/digital channel selector it should have a "normal/cable" setting...if you want to get UHF, this has to be on "normal".
If it is a digital selector there should be actual number buttons on the remote...if it an older preset or motorized tuner the remote will only have "channel higher" and "channel lower".
Last edited by Chad Hauris; 03-01-2005 at 07:12 AM.
|