View Single Post
  #9  
Old 07-19-2009, 10:34 AM
Steve K Steve K is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Thousand Oaks, CA
Posts: 503
" It's also pretty hard to do static convergence using the stick magnets on the converg. assembly. One is pushed in almost all the way, another is pulled out all the way . . ."


Phil:

One thing that might help here is to pull out the magnet and turn it a half turn and reinsert it. Do this to the ones that are all the way in and all the way out. That should bring the adjustment back into normal range.

Steve
Reply With Quote