View Single Post
  #20  
Old 07-11-2009, 10:01 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
That's the 2nd generation chassis that uses the 9-160 power supply/horizontal sweep/HV module. These modules are commonly found with loose connections and those edge connectors often give trouble. If you ever have to pull it apart, it would be wise to resolder everything on the 9-160. Also, clean all the edge connectors. Another common problem with these sets is the flyback blowing up. When they burn up, it sounds like the 4th of July. If I were you and planned on keeping the set, I'd try and secure at least a good 9-160 and a 9-155 video output module as spares. These boards are getting harder to find. Zenith didn't really intend for these sets to be repaired to the component level. They wanted the technician to swap the whole module. I used to do that when I first started repairing TV's; but, I started repairing as many as I could to the component level when 9-160's started costing more than what the TV was worth.
Reply With Quote
Audiokarma