Quote:
Originally Posted by dobulee
Yes, I know the b+ is on the yoke, and yes it was connected. I meant CRT connector as a generic term.
If the power line choke were open, I'd get no voltage on B+ at the CRT.
The entire set is recapped.
What makes you say diodes are a no go? The HV shouldn't care what the line voltage is, as long as the DC voltages come up correct.
If you're making the argument that the powerline is cleaner now than in 1950, I'll disagree -- ask the guy who works switch mode supplies!  Just try running a flourescent light on the same outlet... |
I'm still confused about the jumper then. If you had the yoke connected why did you need a jumper?
John