|
That Siemen uses the Blaupunkt KC chassis & that set you have got has no remote, The remote version of the KC chassis used to have buttons on the front to control the various main functions such as volume, colour & brightness.
The chassis has got an thyistor horz o/p stage. you will find that there are 2 thyistors used, 1 to do the trace & the other to do the retrace.
This set was typical of all Europien designs in the mid 70's sold in Australia & the set also has a phase controled power supply which means if the hook the thing up to an isolating transformer, the transformer will get very hot after a short time due to the DC going back up the mains & causing the transformer to saturate.
I used to play with these sets around 20 years ago so I have learned a little bit about this beastie.
Last edited by daro; 07-09-2009 at 08:23 AM.
|