Well, here it is a week later, and I really went to town on cap replacement. And, with many thanks to John, I now have a (more or less) accurate schematic of the AT chassis. Incidentally, I have come across several 'missing' components in the IF section. There has been at least one omitted capacitor that should be in parallel with an inductance to form one of the traps -- my guess is that this was not a design change, but an error in the original construction. So far I haven't put it in -- we'll see what falls out.
I'm about 90% done with all the paper caps, I am leaving all the mica's in place at the moment. And, I have one of the 3 electrolytic twist locks bodged back in. For now, I've givin up on restuffing them -- I'll worry about authenticity later -- right now I'm still in the 'new project euphoria' stage, and want to get the set up and running.
Current state of the chassis is shown -- Mylar is my capacitor brand of choice -- but there's some Panasonic, Vishay, and a little SBE in there, too.
Incidentally, how in the world do you guys clean the underside of the chassis? When I get a group of caps removed, I clean what I can of the underside of the metal, but even the wiring is completely coated in 'goo.' I dare not use alcohol to clean it, as I fear it will brittle the aging plastics. This set was picked up in major coal country, -- maybe it just lived a dirtly life.
As the crow flies, this was picked up about 80 miles from the Columbus Oh TV market, and also about 80 miles from Charleston, WV. I'm suprised there was anything on the air in 1950...
If I can keep it up a little while longer, I think I'll be ready to bring it up on a variac next weekend. And then, either great exhilaration or mild depression will result
Alex