View Single Post
  #9  
Old 07-02-2009, 08:55 AM
Bill Cahill's Avatar
Bill Cahill Bill Cahill is offline
Super Moderator
 
Join Date: Mar 2005
Location: St. Petersburg, Fl.
Posts: 1,298
Post

No, not safe to try now. Especially with those black beuties in there, and, in hv cage.
Not advisable.
Where origninals are 1,00 volt, use at least that high voltage, as they have quite a pulse on them. Cap values on damper, and, yoke circuits are fairly crittical, and, disc caps will not work properly. Especially not on vertical circuit.
Clean hv thoroughly, as there is tendency to arc.
Yokes, and, flybacks are prone to failure in these sets, are as vertical oscilator transformers.
I do with out line caps, and, line resistors as without them set chassis is electrically safer to touch.
They stopped noise such as car generators, and, diathermy machines, which we no longer use.
Bill Cahill
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..."
Please join my forum.
http://www.tuberadioforum.com/
Reply With Quote