View Single Post
  #6  
Old 06-06-2009, 10:13 AM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
We don't know yet what the problem is before blaming the IF transformers. There are a number of things that could be wrong with it.

First: did the radio work at all before you recapped it?

I could not find a 344 schematic, found a 343 on Nostalgia Air, but am guessing this is a 5 tube AC/DC radio? It should have a loop antenna and won't work properly without the loop being connected. It won't need an external antenna, just the loop.

Next CORRECTED: This has been corrected because I stated the frequencies backwards. Test to see if your oscillator is working. Put another working AM radio tuned to a dead spot between 1400 and 1500 Kc next to your Sentinal. Turn on the Sentinal and tune it back and forth around 1000Kc. If your Sentinal oscillator is working at the proper frequency you should hear a squeal or a rushing noise from your other radio as you tune back and forth.

Come back after you try these things. You'll get it going eventually.

Reece
__________________
Reece

Perfection is hard to reach with a screwdriver.

Last edited by Reece; 06-08-2009 at 11:55 AM.
Reply With Quote