View Single Post
  #3  
Old 06-03-2009, 08:24 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Two things:

1. A sticking on/off relay. I've seen the contacts stick and keep power on the main chassis. The tuner and LED readout would power on and off normally because it uses transistors for switching on and off. I've seen the problem many times on many different brands of TVs. The best solution is to replace the relay. If that's not possible, pop the cover off and clean the contacts.

2. Bad connections on the 9-160 power supply/horizontal sweep/HV module. As you can tell, this board has many heavy parts mounted on it. You need to pull the module and resolder everything on it.
Reply With Quote