View Single Post
  #5  
Old 04-25-2009, 03:48 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
I've worked on several of those back in the day. One big problem they have that will cripple or kill the machine is the clock memory back-up capacitor on the timer board behind the front panel will leak and ruin the board. Something like .47F/5.5V "supercap" as I recall. Anyway I can pretty much guarantee the memory backup cap is no good, you can see that when you set the clock and unplug it, then plug back in. If the clock lost it's time, the cap is bad. Whether it is leaking you'd have to take it apart and look. That model as well as others with the same chassis and conventional tape loading have problems with the mode switch getting noisy causing transport operation problems ( a little shot of DeOxit in the switch helps) , also the tape guide rollers getting loose and out of alignment. And the board on the bottom of the deck has 3 screws that act as grounds for the circuit, and can get loose and cause weird symptoms. Fix is to add small star lockwashers under the screws to ensure ground. That little machine produced one of the best pictures of any VHS VCR. Good luck with it!
Reply With Quote
Audiokarma